{"id":106597,"date":"2024-07-18T12:09:31","date_gmt":"2024-07-18T16:09:31","guid":{"rendered":"https:\/\/\/?p=106597"},"modified":"2024-07-18T12:09:31","modified_gmt":"2024-07-18T16:09:31","slug":"how-often-do-you-actually-need-boots-on-the-roof","status":"publish","type":"post","link":"https:\/\/\/2024\/07\/how-often-do-you-actually-need-boots-on-the-roof\/","title":{"rendered":"How Often Do You (Actually) Need \u201cBoots on the Roof\u201d?"},"content":{"rendered":"
<\/p>\n
Takeaway:<\/strong> Solar requires going on the roof \u2014 but you shouldn\u2019t put Surveyors at risk for any longer than necessary. Instead of assuming you always need \u201cboots on the roof,\u201d consider leveraging technology where appropriate to keep Surveyors safe, while making the job both faster and more accurate.<\/p>\n Sometimes going on the roof is necessary. But why prolong it and put Surveyors at additional risk more than you have to?<\/p>\n Being up on the roof is fundamentally risky: 64% of Surveyors report<\/a> accidents like dropping equipment. Going on the roof is also cited<\/a> as one of the least favorite parts of the job; further, Surveyors often cut corners for the sake of safety (and who can blame them?).<\/p>\n Are we willing to put human life at risk because of a preconceived notion that business should be done as it always has been? Just because you\u2019re on the roof for some work (like a structural check), you don\u2019t have to do everything manually. Besides, harnessing in for safety might protect workers, but no homeowner wants extra holes in their roof before install day.<\/p>\n Instead, the goal should be minimizing time spent on the roof and only climbing up when necessary.<\/p>\n Start by asking what data you want to collect from the roof.<\/p>\n Usually, it\u2019s the same data points:<\/p>\n Depending on your business structure, you might also want to identify upsell opportunities. For instance, a homeowner needing a new roof or using the survey as an opportunity to talk about heat pumps or electric vehicle charging.<\/p>\n Being on the roof is not just unsafe for humans\u2014in many cases, it\u2019s not the best way to collect certain data.<\/p>\n 1. Measurements<\/strong><\/p>\n The majority (86%) of Surveyors and Designers acknowledge<\/a> incorrect manual measurements are the leading cause of survey mistakes.<\/p>\n Drones, on the other hand, are equally, if not more accurate<\/a> to a high-quality manual survey, but without the human error risk.<\/p>\n Even if your Surveyors are perfectly accurate every time without fail, chances are they are only measuring a couple of roof planes or using satellite imagery with significant setbacks. If that<\/em> isn\u2019t the case, they are probably taking over 60 minutes to conduct the survey. All of these situations amount to suboptimal systems and processes, either because array designs might change or you miss out on additional panels due to unnecessary setbacks.<\/p>\n 2. Production Estimates<\/strong><\/p>\n If you default to aerial or satellite imagery, you risk grainy 2D models with skewed angles, the result of which is not fully accurate measurements. This could be multiple inches off of true, meaning you might lose a line of panels going from preliminary survey to final design\u2014a huge issue if you offer production guarantees<\/a>.<\/p>\n The same goes for shading; not doing on-site shade analysis often results in poor results, which again impacts actual production compared to estimates. What\u2019s more is Surveyors know this already, with 81% acknowledging on-site shade data is better than remote data<\/a> due to issues around skew and data recency.<\/p>\n Using drones, you can easily build a whole-site 3D orthomosaic map<\/a> that shows every tree and shade-causing element. This gives you more accurate production estimates you can stand behind in your pitches.<\/p>\n 3. Roof Shingle Health<\/strong><\/p>\n If your goal is to check for shingle layers or conduct a clay hammer test, you can climb to the roof edge<\/em>, making the job safer, equally accurate, and more efficient. Similarly, if you can see rafters from inside, you don\u2019t need to climb on the roof.<\/p>\n Climbing on the roof pre-installation is only truly necessary to validate roof structural health (since satellite imagery simply can\u2019t do the job properly<\/a> and drones cannot tell you everything about roof health<\/a>). The only exception is a new construction, since you can work from builder blueprints.<\/p>\n If you are working in an older home where you can\u2019t access the attic and see rafters, then<\/em> the only way to get the job done is climbing on the roof.<\/p>\n The mindset of \u201cthere\u2019s one task that requires a roof climb, so collect everything while you\u2019re up there\u201d causes a lot of problems.<\/p>\n 1. Safety<\/strong>: The longer someone is on the roof, the higher the risk of accidents. For example, 37% of Surveyors say<\/a> they\u2019ve refused to climb on certain roofs for safety reasons; this often results in losing revenue Contractors could have won if they used drones.<\/p>\n 2. Speed<\/strong>: A comprehensive survey can easily take 30-60+ minutes, even on a simple roof. A drone, on the other hand, takes about 10 minutes and gives you more time on the ground to talk with customers or hustle to your next site.<\/p>\n Accuracy<\/strong>: Drones are more reliable over the life of multiple projects. Even if you have a great employee, this is not sustainable as that person wants to go on vacation, may get sick or injured, or simply burns out of the physically intense job<\/a> that is manual surveying. Then there\u2019s simply daily exhaustion\u2014there’s no way a surveyor will have the same vigor on the last job of the day compared to the first, especially in scorching heat or freezing winters.<\/p>\n Talent attraction and retention<\/strong>: Solar has a significant and growing talent gap<\/a>\u2014the last thing you want is people burning out from intense manual work. On the other hand, you may have trouble recruiting more experienced talent who simply doesn\u2019t want to climb on roofs all day. Leveraging technology, you can keep your current people longer, have them do more projects, and<\/em> tap into a new talent pool.<\/p>\n
\n<\/p>\n
What information is commonly captured in a site survey?<\/h5>\n
\n
When is manually collecting data detrimental to project quality?<\/h5>\n
<\/p>\n
When is going on the roof the only way to ensure quality?<\/h5>\n
What am I giving up by sticking with old ways?<\/h5>\n